Model: B113-1
Technical Specification:
Dimension: 59” x 10”
White tempered glass"(6mm thickness)
Stainless Steel (#304) body
Square top shower head
6 Square Brass massage body jets (Chrome Plated) - adjustable
Chrome plated hand shower
Square hand shower
Single zone function
Pressure Balance Valve
1.5m flexible reinforced stainless"steel
hose cUPC approved
Standard 1/2" water inlets
Maintenance
Your new shower panel is designed for years of trouble-free performance.Keep it looking new by cleaning it periodically with a soft cloth,Avoid abrasive cleaners,steel wool and harsh chemicals as these will scratch,dull,and damage the finish or product void your warranty
Tools needed
Adjustable wrench Groove joint pliers Plumber's putty Pipe tape Flat screwdriver
Safety Tips
If you use soldering for the installation of the shower panel.the seats,cartrldges and washes will have to be removed before using flame,otherwlse,warranty will be void on these parts, Protect your eyes with safety glasses when cutting or soldering water supply lines.Cover your drain to avoid losing parts
Important points
Prior to beginning installation ,turn off the cold and hot water lines and open the hot and cold knobs on the old faucet to release build-up pressure. when installation your new faucet, turn the connector nuts flnger-tight,then use one wrench to anchor the fitting and a second wrench to tighten the nut one additional turn. connections that are too tight will reduce the integrity of the system Wrap all threaded connections with Teflon tape available at your local hardware or plumping supply store.Always wrap in a clockwise direction.All installation can vary depending on how your previous faucet was installed. not all necessary supplies to install your faucet are inciuded.however,they are available wherever plumbing supplies are sold
